Kenworth’s 60,000th Australian-designed and manufactured truck rolls off its Melbourne production line | TRANSPORT NEWS

Kenworth Australia has delivered its 60,000th Australian-designed and built truck to long-standing Kenworth customer Peter Wickham, co-founder of Wickham Freight Lines.

Andrew Hadjikakou, Managing Director of PACCAR Australia, handed the keys of the T610SAR prime mover to Peter at the Bayswater facility today.

Wickham Freight Lines is one of Australia’s largest privately-owned transport companies.

Andrew said Kenworth’s achievement in manufacturing 60,000 trucks was a major milestone, not only for the company and its dealer group, but for its suppliers, the vast majority of whom are local.

“Celebrating key production milestones is a Kenworth tradition, one that began in April 1974 when we handed over the keys to truck number 1,000. Since then we’ve celebrated each major milestone, leading to today, when we hand over the keys to the 60,000th truck that’s rolled off the Kenworth production line since we began designing and manufacturing uniquely Australian trucks in 1971,” Mr Hadjikakou said.

 

Andrew said Australia had a diverse range of operating environments unlike anywhere else in the world. Trucks must deal with extreme heat in remote, dusty mines and across deserts. Others must haul loads that are two or three times heavier than overseas, and on rough and unmade roads. Often trucks are required to perform an inordinate amount of hours, some as much as 24 hours a day.

“It’s critical this country has a local manufacturer that understands the challenges facing transport businesses. Kenworth is the only local truck manufacturer offering full design capability, technical expertise and resources to application-engineer trucks for the most extreme on and off-road operations,” Andrew explained.

“Our trucks are designed to satisfy these unique needs. They feature higher cooling capacities to handle heavier weights and hotter conditions, more robust construction to manage the roughest roads, and embody a design philosophy that means cost-effective maintenance and reliability,” he added.

Mr Hadjikakou said Kenworth’s more than 45 years of local manufacturing have a significant ripple effect that has benefited many Australian industries and Australians.

The company currently employs more than 1,000 staff in Melbourne, the majority of whom are directly or indirectly involved in the manufacturing operations. It also supports the industry’s best nationwide network of PACCAR dealers who employ about 3,000 people throughout Australia. In addition, the company supports a variety of local suppliers who provide the majority of the parts and materials which make a Kenworth.

As part of its manufacturing commitment, Kenworth has made a substantial investment in design engineering.

“Local design and manufacturing remains the driving force behind our business, and we’re in it for the long haul. We are continually reinvesting in expanding our operations, continually refining our techniques and introducing new technologies. Most importantly, we listen to our customers and we meet their needs,” Andrew added

Wickham Freight Lines takes possession of 60,000th Kenworth

 

Wickhams is one of the largest privately-owned transport companies in Australia. Established in 1992 it specialises in transporting fresh, chilled and frozen meat and produce, as well as consumer products and dry goods, servicing retail supply chains and other logistics providers. With its unique head office in the shape of a Kenworth K108 cabover in Warwick, Queensland, and terminals in Sydney and Melbourne, the company now operates a Kenworth fleet of 160 prime movers with its distinctive red and white livery.

Wickhams employs various Kenworth models to handle different applications, but the fleet is predominantly the cabover K200.

The company’s latest T610SAR – Kenworth’s 60,000th truck – is powered by a Cummins X15 engine, producing 600 hp and 1850 lb/ft of torque. The engine uses SCR exhaust after-treatment technology for emission reduction, which meets Euro 5 and Australian ADR 80/03 emissions regulations.

The truck is equipped with an Eaton Fuller RTLO22918B 18-speed manual transmission, Meritor MF573 (7.3t) front axles and Meritor RT46-160GP rear axles. It also features two 480-litre and two 400-litre rectangular fuel tanks, Kenworth Airglide 460 suspension and an 860mm Aero Roof sleeper.

Wickhams’s T610SAR, will go to work transporting meat and produce in refrigerated trailers travelling to approximately 250,000 kilometres a year along the eastern seaboard.

Kenworth’s T610SAR is the brand’s latest release. In just one year since its launch on December 3, 2016, it has established itself as a versatile and hard yards specialist, which can manage a variety of applications; including interstate line haul up to 19m B-double and tipper and dog applications.

The T610SAR features a significantly wider cabin, which is centred around the needs of the driver. With increased walkthrough space between seats, greater room head-to-toe for the driver, more standing room in the sleeper cabs, the interior is far easier to move around in. With advanced heating and cooling that’s more powerful yet efficient, the cabin maintains optimum temperature at all times. The expansive windscreen offers a panoramic view of the road, the cabin’s superior ergonomics means controls are positioned intuitively and dashboard instrumentation is visible at a glance. With a complete range of active and passive safety features, including advanced collision avoidance technology, the T610 readily adapts to operating conditions to enhance fuel economy with no impact on productivity.

Mr Eather says the T610, like all Kenworth models, offers significant advantages compared with other American-style and European brands he has tried over the years.

“We have bought almost 250 Kenworths, and we continue to buy them every year because it’s good for business. With Just In Time (JIT) deliveries now the norm, our customers need our trucks there on time every time. Kenworths are designed and manufactured in Australia for Australia’s harsh environments and applications. And Kenworth builds trucks to our exact specifications and requirements – and that makes all the difference,” he said.

“Kenworth trucks are more reliable, durable and cost effective to run. They can handle hard work, long hours and many years of service. It’s no wonder our drivers love them. The trucks are also safe and comfortable to operate, and they perform well under any conditions,” he explained.

Mr Eather says Kenworth’s nationwide dealer network, in particular Brown and Hurley, also plays an integral role in its transport efficiency. “Our trucks cover a lot of territory, so it’s comforting to know that if they ever have a problem, there’s a Kenworth dealer nearby,” he added.

Kenworth trucks, with GCM from 39 to 260 tonnes, cover the full spectrum of heavy and extreme-duty applications. This includes multiple-trailer regional and interstate freight, tipper and dog construction work as well as off-highway operations for the logging and mining industries.

 

Share on FacebookEmail this to someonePrint this pageShare on Google+Share on TumblrTweet about this on TwitterShare on LinkedIn

Leave a Reply

Your email address will not be published. Required fields are marked *

*

x

Check Also

ATA AND DAIMLER TRUCK AND BUS TO DEVELOP THE TRUCKING INDUSTRY’S FUTURE | TRANSPORT NEWS

CANBERRA, 14 December 2017 – The Australian Trucking Association and Daimler Truck and Bus Australia ...